Carpet Installation in College Park, GA

Most carpet is priced by the square yard, and the yardage on an estimate is where many homeowners first get confused. A carpet installation in College Park starts with careful measuring of every room, hallway and closet, because that measurement decides seam placement, transition locations and how much carpet has to be ordered.

Measuring rooms, halls and closets

We measure each space at its longest and widest points and sketch any jogs, bay windows, closets and stair openings. Carpet comes off a roll of a set width, commonly 12 feet, so the sketch shows how strips will be cut from that roll to cover each area with the fewest and least visible seams.

Hallways are usually done with one long piece running down their length, so there are no crosswise seams in the walking path. Closets get pieces that match the pile direction of the bedroom they open into.

Why the yardage is higher than the floor area

Carpet has to be ordered in full roll widths, all pieces must run the same pile direction, and patterned carpet needs extra length so the pattern lines up across seams. Each cut also needs a few inches for trimming at the walls. Together these mean the yardage ordered is more than the floor area of the rooms. A clear estimate shows the measured area, the ordered quantity and the layout that connects the two.

Transition hardware where carpet stops

Where carpet meets tile, wood or vinyl, the edge has to be gripped and finished. A Z-bar, a thin metal strip fastened to the subfloor with a lip the carpet is hooked into and tucked under, gives a clean edge with little metal showing. Where the hard floor is lower than the carpet, a reducer or carpet-to-tile transition makes the step gradual. We measure transition height at each doorway and list the hardware per opening.

Where carpet sits beside a new plank floor, it helps to plan both together; our LVP flooring installation in College Park covers how plank floors are finished at those edges.

Selections: fiber, pile style and weight

Fiber and pile style together decide how a carpet feels and wears. Nylon cut pile is resilient in family rooms and halls; polyester is soft and resists many stains but can mat in heavy traffic; a loop or Berber style hides footprints but can snag. Face weight tells you how much yarn is in the carpet, while density and twist decide whether it stays upright.

Checking stair nosings and the subfloor while measuring

The measuring visit doubles as an inspection. We press on each stair nosing and walk the rooms for panels that flex or squeak. Nosings that move are fastened before carpet goes over them, and loose subfloor panels are screwed down so they stay quiet under the new pad. The same visit settles the pad type and density, which rooms need new tack strip and which doors will need trimming to clear the taller floor.

What happens on installation day

Furniture is moved out room by room, old carpet and pad are removed and the subfloor is repaired. Tack strip, pad and carpet follow, then seaming, power-stretching and trimming. Stairs and transitions are finished last. Before leaving we check the padding at the edges, door clearance and transition height at every opening.

If you are planning other updates at the same time, our page on remodeling services in College Park explains what else we take on.

College Park permits for related repairs

College Park straddles Fulton and Clayton counties. Structural repair, or moving plumbing or electrical lines while the floor is open, is a matter for the City of College Park Department of Building and Inspections, which can confirm whether that part of the work needs a permit.

Yardage, closet and transition questions

Why does my carpet estimate list more yards than my rooms measure?

Because carpet is cut from rolls of a fixed width, and every piece must run the same direction so the color looks even. Leftover strips that fit nowhere, extra length for pattern matching and trimming allowance at the walls all add to the order. A good estimate shows both the measured floor area and the quantity ordered, along with the seam layout.

Does new carpet go inside closets, and do the closet doors come off?

Closets are usually carpeted along with the room they open into, using pieces that match the room’s pile direction. Bifold and sliding doors are often lifted out so the floor can be reached, then reinstalled, and their floor guides may need adjusting afterward. Empty the closet floors beforehand so the crew can work without handling your belongings.

What is the hidden metal edge used where carpet meets tile?

It is usually a Z-bar: a narrow metal edge nailed or screwed down where the carpet ends, with a lip that turns up. The carpet is stretched onto its teeth and tucked down into the lip, leaving a neat edge against tile, wood or vinyl with little metal visible. It works well when the carpet and the hard floor are close in height.

Get a measured layout for your College Park rooms

Phone 404-409-4448 to tell us which rooms, halls and stairs are on your list. We will arrange a visit to measure and give you a written estimate with the layout explained.