Kitchen Remodeling in Sandy Springs, GA

Cabinets are often one of the largest lines in a kitchen budget, and the way they are built and sized affects the layout as much as the look. When homeowners plan kitchen remodeling in Sandy Springs, an early choice is the kind of cabinetry: stock, semi-custom or custom. Each brings different sizes, options and lead times.

Stock, semi-custom and custom cabinetry

Stock cabinets come in fixed sizes, usually in 3-inch width steps, with a limited choice of door styles and finishes. They are made ahead and tend to arrive soonest. Semi-custom lines start from standard boxes but allow modified depths, heights and widths, more finishes and a wider range of interior accessories. Custom cabinets are built to the exact dimensions of your room, with whatever size, material or detail you specify, and generally take the longest.

Many kitchens mix approaches, for instance semi-custom boxes with a custom island or hood surround. What matters is that the cabinet line can produce the sizes your room and appliances actually need.

Fitting standard sizes to a real room

Walls rarely land on a 3-inch increment. Fillers make up the difference between a run of standard boxes and the actual wall length, and they also keep doors and drawers from striking a wall, a window casing or the handle on the next cabinet. A good layout puts fillers where they help, such as beside a corner or next to the refrigerator, rather than leaving a wide, awkward strip at one end.

Semi-custom and custom cabinets can reduce fillers by adjusting box widths, which often gains usable storage along the same wall.

Storage planning inside the boxes

Before choosing a line, list what you store: everyday dishes, pots and lids, small appliances, baking sheets, pantry food, cleaning supplies and recycling. Then check which line offers inserts for those items, such as deep drawers, tray dividers, pull-out pantries or corner fittings. A stock line with few accessories may cost less up front but leave you organizing with bins afterward.

Appliance openings and clearances

Appliance openings are where cabinet type matters most. A stock tall oven cabinet may be sized for common wall ovens but not for the model you prefer, while a semi-custom line can often be ordered to the exact cutout. Before ordering, we compare every opening with the manufacturer’s specification sheet, including side clearances, door swing and space for connections behind the unit.

Templating and lighting once the boxes are in

After the cabinets are installed and leveled, the countertop is templated directly from them, so any small difference between drawing and room is captured. Task lighting under the wall cabinets depends on cabinet construction too: framed cabinets often have a recess at the bottom that hides fixtures, while frameless boxes usually need a light rail. Ambient ceiling lights and any pendants are placed before the ceiling is closed.

Finished cabinets need protection during the rest of the work, especially painted custom finishes. Doors can be removed and stored, and boxes covered, until the dusty steps are over. If the project may spread past the kitchen, our remodeling services for Sandy Springs page covers the rest of the house.

How plumbing permits work in Sandy Springs

The city’s plumbing permits page explains that residential and commercial plumbing projects need a plumbing permit, with simple repairs, like unclogging a sink, left out. When the plumbing is included in a larger building permit, no second permit is needed.

For homes, either a contractor with the proper license or an owner working on his or her current permanent residence can pull the permit. These permits are typically issued at the counter, and the work gets a rough inspection and a final inspection.

Questions about cabinet types, permits and pantries in Sandy Springs

What is the difference between stock and semi-custom cabinets?

Stock cabinets are made ahead in fixed sizes and a limited range of styles and finishes, so they tend to arrive quickly. Semi-custom cabinets start from standard boxes but can be modified in width, depth or height and offer more finishes and accessories. The choice affects how closely the cabinets fit your walls and appliances and how many fillers the layout needs.

Does a Sandy Springs kitchen remodel need a separate plumbing permit?

Not always. The city requires a plumbing permit for residential plumbing projects, apart from simple repairs such as unclogging a sink, but plumbing covered by a larger building permit does not need its own. Residential plumbing permits go to contractors with a license or to owners for their current permanent residence, are typically issued over the counter and include rough and final inspections.

Can tall pantry cabinets replace a walk-in pantry?

Often they can. A pair of tall pantry cabinets with roll-out shelves puts every item within reach from the front, which a deep walk-in shelf does not. They do take up wall space that could otherwise hold base and wall cabinets, so check that the layout keeps enough counter. Pantry doors also need a swing path clear of the refrigerator and nearby drawers.

Compare cabinet options with us

To talk through which type of cabinetry suits your kitchen, phone 404-409-4448. We can measure the room, review the appliances you plan to use and give you a written estimate for the option you prefer.