Kitchen Remodeling in Mableton, GA

Every appliance in a kitchen is tied to something behind the wall or under the floor: a water line, a drain, a gas pipe or a dedicated circuit. When a kitchen remodeling plan in Mableton moves the sink, swaps an electric range for gas or adds an ice maker, those connections move too. Understanding what each change involves helps you decide which ones are worth making.

We also look at the finishes around the kitchen, since the new work has to meet floors and walls that are staying.

The sink and dishwasher connections

A sink needs hot and cold supply lines, a drain with a trap and a vent that lets the drain flow freely. Shifting it a short distance along the same wall is usually straightforward. Moving it across the room or into an island means a new drain route and venting solution, which the plumber works out with the floor structure in mind.

The dishwasher shares the sink’s drain and usually its hot water supply, and it needs power. Keeping it directly beside the sink keeps those runs short and makes the drain hose easier to route.

Gas, electric and the range

Changing from an electric range to gas means running a gas line to the new spot with a reachable shutoff valve, plus a standard outlet for the igniter and clock. Going the other way, from gas to electric or induction, usually calls for a 240-volt circuit sized to the appliance, which may need open space in the electrical panel.

Ventilation follows the range. A more powerful cooktop may justify a larger hood, and the duct route outdoors should be settled before cabinets are ordered so the cabinet above the range can be built around it.

Refrigerators, ice makers and small additions

A refrigerator with an ice maker or water dispenser needs a cold-water line, usually run to a recessed valve box behind the refrigerator. A reachable valve lets you shut off the water without unplugging and pulling out the whole unit.

Small items add up. A pot filler over the range, a garbage disposal, an instant hot water tap or under-cabinet lights each need their own pipe, outlet or switch. Listing them early keeps the electrical and plumbing scope accurate.

Appliance clearances and lighting

Once connection points are settled, clearances are checked against each model’s installation guide: opening size, side gaps, door swing and room for the cord, hose or gas connector behind the appliance. A refrigerator pushed against a poorly placed valve box may not sit flush, so the box goes where the manufacturer recommends.

Light fixtures and switches are laid out at the same stage, while walls are open. Recessed lights have to stay clear of the hood duct and the joists it runs between.

Hardware, fixtures and the finishes next door

The faucet, sink, cabinet pulls and light fixtures read as a set, so choose finishes together and handle samples before committing. A faucet with a separate side sprayer needs an extra hole, and a pull-down model needs room below the sink for its hose and counterweight.

Adjoining rooms matter too. Where the kitchen floor meets a hallway or family room, the joint is worked out from the height of each floor. The backsplash meets painted walls at its edges, so its stopping point and the wall color are decided together. Wall color is covered on our interior painting page, and backsplash materials under tile installation for Mableton homes.

Permits moved from Cobb County to the city

Permit applications are now handled by the city rather than the county. According to Cobb County’s codes and standards page, the county stopped taking building and development applications for Mableton addresses after February 28, 2025, and the new city began accepting them on March 1, 2025.

The city’s Building Division handles plumbing permits for water, sewer and gas line work, new or repaired, and accepts applications through its online portal only; emailed applications are not taken. Its FAQ says homeowners may pull permits for work they do themselves on their primary residence, while a hired contractor must hold the proper license and pull the permit. Inspection requests are due by 4 p.m. the day before.

Questions about remodeling a Mableton kitchen

Should my kitchen permit go to Cobb County or the city?

To the city. Cobb County stopped accepting building and development permit applications for Mableton addresses after February 28, 2025, and the city took over on March 1, 2025. Its Building Division accepts applications through the online portal only. If a contractor is doing the work, the contractor pulls the permit; homeowners may pull one only for work they do themselves on their primary residence.

Does a refrigerator with an ice maker need a water line?

Yes. Ice makers and water dispensers need a cold-water supply, typically run to a recessed valve box in the wall behind the refrigerator. The box keeps the shutoff reachable and lets the refrigerator sit closer to the wall. Planning it during the remodel is much easier than adding it later, when the line would have to be fished through finished walls or cabinets.

Can a gas range replace an electric one during a kitchen remodel?

In many homes, yes, provided gas service reaches the house. A gas line is run to the range location with an accessible shutoff valve, and a standard outlet powers the igniter and controls. Gas line installations fall under the plumbing permits the city’s Building Division issues, and the hood and its duct should be sized for the new cooktop.

Map your kitchen’s connections with us

Before you decide which appliances to move, call 404-409-4448 and tell us what you have in mind. We can look at the existing pipes, gas and wiring and write up what each change would involve.