Exterior Painting in College Park, GA

When homeowners in College Park collect bids for exterior painting, the totals often differ more than expected. The reason is usually not the paint itself but the work around it: how much preparation is included, how damaged wood is handled, and how many coats go on each surface.

Going through a proposal one section at a time makes those differences easy to spot and tells you which questions to ask.

Condition notes: the starting point of any bid

A proposal built on a real site visit records what the house looks like now. Expect notes on soft or damaged wood, mildew or surface dirt, rusted metal, peeling or chalking paint, and any spots that are difficult to reach safely. Those notes explain why preparation is priced the way it is.

If a bid has no condition notes at all, it is hard to know whether rot repair or heavy scraping is included or will turn into an extra later.

Preparation standard and drying time

The preparation section should say how the house is cleaned, how loose paint is removed and how bare areas are primed. Washing is followed by a drying period, because wet wood and damp masonry do not hold paint well, so a proposal that mentions waiting for surfaces to dry is describing a step that matters.

Look for wording about surface condition before painting as well: chalk removed, glossy areas dulled, cracks and holes filled. Vague phrases such as “prep as needed” leave too much open.

Wood repair: fixed items versus allowances

Repairs can be priced two ways. Known damage, such as a rotted window sill or a section of fascia, can be listed as a fixed item with its location. Damage that might exist but cannot be seen yet is often covered by an allowance or a unit price per board or per foot, with anything beyond it handled by written change order.

Both approaches are reasonable. What matters is that the proposal says which one applies, so you are not caught off guard when scraping uncovers soft wood behind sound-looking paint.

Caulk, colors and accents

A complete proposal names the caulk to be used, or at least its type, such as a paintable exterior sealant, and where it goes. It also lists colors by surface: body, trim, and accents like the front door or shutters. Settling these before the job starts prevents mismatched colors and last-minute product swaps.

Color choices also affect the preparation line. A switch from a dark body color to a light one usually calls for a full primer coat so the old color does not show through, and high trim is easier to get right when its color is fixed before equipment goes up.

Products, coats and weather exposure

Each surface should have a product, sheen and number of coats. Walls facing the most sun and rain wear fastest, so they are where a durable acrylic topcoat and full coverage count most. If old oil paint is present, the proposal should mention a bonding primer; if it says nothing about compatibility, ask how the crew plans to handle it.

Cleanup, exclusions and the final walk-around

The last section should cover protection of plants, walks and windows, daily and final cleanup, and what is excluded, such as fences, decks or interior work. It should also say how the final review works. On our jobs, color placement is checked against the plan, areas reached by ladder or lift are inspected before equipment leaves, and any open joints that were missed are sealed.

College Park permit contacts

College Park lies in Fulton and Clayton counties. Permit questions about structural, plumbing or electrical work that comes up alongside a repaint can go to the City of College Park Department of Building and Inspections. For rooms inside the house, see our page on interior painting in College Park.

Questions about comparing exterior painting bids

Why do exterior painting estimates for the same house vary so much?

Most of the difference comes from preparation and repairs rather than paint. One bid may include scraping every loose edge, spot priming, caulking and replacing soft trim, while another covers only washing and two coats. Product lines and the number of coats also vary. Comparing the written scope line by line shows whether the bids describe the same work.

What is a repair allowance in a painting proposal?

An allowance sets aside an amount or a quantity, such as a number of trim boards, for repairs that cannot be fully measured before work starts. If actual repairs use less, the difference is credited; if they need more, the extra is priced by change order. The proposal should state the allowance and how overages are approved.

Should a painting proposal list specific paint products?

Yes, whenever possible. Naming the product line, sheen and number of coats for each surface lets you compare bids and confirm that what arrives on site matches what you agreed to. If a bid describes the paint only in general terms, ask which product it means and how many coats it includes on each surface.

Get a written estimate

Already collecting bids? Call 404-409-4448 to set up a visit, and we will give you a written estimate laid out the way this page describes, with condition notes, preparation, repairs, products and exclusions.